Acme Services...

Pile Driving:

Timber Piles: Timber piles can be the
most cost effective method  to install
your foundation for residential and
small commercial buildings.

Helical piles: An practical & economical
method of reinforcing existing foundations.

Mini-piles: Drilled grout filled pipe piles
with hi-strength bars for  higher capacities.

H-Piles: Driven generally for H-beams and lagging systems.

Auger Cast Piles: Auger Cast Piles are installed by rotating a continuously flighted hollow shaft
auger into the soil to a specified depth. High strength cement grout is pumped under pressure through the hollow shaft as the auger is slowly withdrawn. The resulting grout column hardens and forms an auger cast pile.

Sheet Piling: Steel sheet piles are long structural sections with a vertical interlocking system that creates a continuous wall. The walls are most often used to retain either soil or water. The ability of a sheet pile section to perform is dependent upon its geometry and the soils it is driven into. The pile transfers pressure from the high side of the wall to the soil in front of the wall.

Marine Construction:

• Bulk Heads Construction & Repair
• Chance Helical Piers
• Docks
  

Dynamic Compaction:
Would you like to reduce your foundation costs SIGNIFICANTLY!!
If your project is designed on piles or controlled fill, you can significantly reduce your construction
costs with deep dynamic compaction. Dynamic compaction is less than a third of the cost of piles, caissons or excavate and backfill

Click Here to See our Photo Gallery